Go to Top

How to Properly Balance Your Residential Pool in Studio City

Most people think that pool balancing is among the worst consequences of owning a swimming pool. If you are one of these worried and dismayed people, congratulate yourself. You have just found the best solution to your problems by visiting this site. We are going to show you how you can balance your swimming pool in an amazingly simple way.

Measuring the pH

PH is the measure of how acidic the water is. We measure pH on a scale of 1- 14 with 7 being the neutral value. You should know that everything that enters your swimming pool has a pH value which you should determine. The pH should be slightly greater than the neutral value and not less. In case you find it to be less than 7, it is corrosive. According to Studio City pool maintenance experts, this state is potentially dangerous to your skin and other vital body organs. Most people dealing with pool services in studio city use muriatic acid to balance the pH.

Total Alkalinity

Alkalinity is a close sibling to pH. It measures how basic the water is by determining the amount of carbonates, bicarbonates and hydroxides in the pool water. Measuring the level of alkalinity in water is essential since it prevents the pH from bouncing to unfavorable levels. You should maintain alkalinity at 80-120 ppm. In case it is high, you can add an acidic compound to bring it back to the desired level. If you don’t know how to do this, contact pool services in Studio City for help.

Hardness of the Water

When we talk of water hardness, we mean the amount of calcium carbonate present. An excess amount of calcium carbonate in the water can make the water very saturated. This will lead to small deposits on the surfaces within the pool. If the level of calcium in the water becomes too low, the water will become corrosive in an attempt to get the amount of calcium it requires. You can use products such as CalTrea to treat high calcium in the pool. If it’s too low, you can add calcium chloride. Most providers of pool service in Studio City have effective ways that can help you get the desired levels of hardness.

Diagnosing the Water Balance

You need to diagnose the state of the pool every week using the saturation index. You need to test the pH, temperature, hardness and total alkalinity to enable you to determine this index. Compare this to the charts assigned for respective values and subtracted 12.1. In most cases, a result that falls within -0.3 to 0.5 is acceptable.

In case you are wary of the whole process, seek help from a qualified Studio City pool maintenance service provides. Champion Pools is one of the best providers of pool services in Studio City. Contact them if you want a reliable and satisfying Studio City pool maintenance service.